Articles
| Open Access |
DOI:
https://doi.org/10.55640/eijmrms-03-05-01
THE EFFECT OF SLENDER-WIRE DIAMETERS ON THE PERFORMANCE OF INTELLIGENT HELICAL SPRINGS
Suresh Agarwal , Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, India Sukhwinder Singh , Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, IndiaAbstract
This study investigates the effect of using slender-wire diameters in the design of intelligent helical springs. A series of experiments were conducted to evaluate the performance characteristics of helical springs manufactured using wire diameters ranging from 0.5mm to 2.0mm. The results showed that the use of slender-wire diameters resulted in an increase in spring stiffness and a reduction in weight. The implications of these findings for the design of suspension systems in automobiles and aerospace structures are discussed.
Keywords
slender-wire diameters, intelligent helical springs, spring stiffness
References
Wang, H., & Hu, H. (2015). Design of Intelligent Helical Springs for Vehicle Suspension Systems. Journal of Mechanical Engineering, 51(12), 179-185.
Kim, D. H., & Kim, H. S. (2016). Design and Analysis of Slender Helical Springs for Aerospace Applications. Journal of Aerospace Engineering, 29(4), 04016010.
Bhattacharya, B., & Srinivasan, M. A. (2017). Experimental Study of Helical Springs with Slender Wire Diameters. International Journal of Mechanical Sciences, 128, 143-153.
Shen, X., Wang, X., & Tang, Z. (2018). Theoretical Analysis and Experimental Study of a New Type of Slender Wire Helical Spring. Journal of Applied Mechanics and Technical Physics, 59(4), 680-687.
Wu, H., Zhao, G., Chen, Y., & Lu, J. (2019). Influence of Slender Wire Diameter on the Fatigue Life of Helical Compression Springs. International Journal of Fatigue, 127, 308-317.
Article Statistics
Downloads
Metrics
Copyright License
Copyright (c) 2023 Suresh Agarwal, Sukhwinder Singh
This work is licensed under a Creative Commons Attribution 4.0 International License.
Individual articles are published Open Access under the Creative Commons Licence: CC-BY 4.0.