Articles | Open Access | DOI: https://doi.org/10.55640/eijmrms-02-05-10

IMPROVING THE TRANSMISSION UNITS OF SPINNING SHOP MACHINES

Toshtemirov Q.A. , Assistant, Fergana Polytechnic Institute, Fergana, Uzbekistan
Sultonov.S.T. , Assistant, Fergana Polytechnic Institute, Fergana, Uzbekistan

Abstract

The purpose of the transfer process is to improve the quality of the units by accurately transmitting the movement of the nodes in the spinning of fibres, reducing the cost of production, increasing productivity, and extending the life of the equipment. The essence of extending the operating time of the equipment is to increase the speed of movement of the spinning fibres' efficient use of time and labour in their production.

Keywords

Reducing the cost of production, increasing productivity

References

Badalov K.I. (1989). Pryadenie khlopka i drugix tekstilnix volokon. Moscow.

Borzunov I.G. «Pradenie xlopka i ximicheskix volokon», Ch.I 1981.

Ivanov S. and dr. (1978). Technical control in xlopkopryadenii».

Marasulov Sh.R. (1985). Spinning of cotton and man-made fibres. Part I. In the Uzbek.

Pavlov Yu.V. and dr. (2000). Theory of processes, technology and equipment for the application of cotton wool and chemicals volokon. M.

Esonzoda, S., Khalikova, Z., & Ibragimov, A. (2021). Determination of moisture and temperature of cotton from the drying drum with the IT. International Engineering Journal For Research & Development, 6(3), 7-7.

Odilzhanovich, T. K., Makhmudovna, N. M., & Odilzhanovich, I. A. (2021). The selection of the control parameter of the raw cotton electric sorter. Innovative Technologica: Methodical Research Journal, 2(11), 1-5.

Shakhnoza, U., Mirpolat, K., Khasan, A., Rustam, A., Tulkin, O., & Islombek, N. (2021). Change of Quality Indicators of Fabric Fabrics. Annals of the Romanian Society for Cell Biology, 25(6), 2869-2874.

NuraliQudratovich, S., AbdurahmonMuzaffarovich, E., & UlugbekTolibjonogli, T. (2020). To study the main factors influencing fiber quality in the process of sawdust separation and their interdependence. European Journal of Molecular & Clinical Medicine, 7(07), 2020.

Oripov, N., Komilov, J., Xolikova, Z., & Toshmirzaevk, O. Research on the Introduction of a Double-faced Improved Cotton Separator. International Journal of Innovations in Engineering Research and Technology, 7(12), 105-110.

Isaev, S. S., Yu, E., Oripov, N., & Xakimov, I. Study of the Effect on the Natural Characteristics of Fibre in the Process of Application of Cotton Processing Technology. International Journal of Innovations in Engineering Research and Technology, 7(12), 111-116.

Toshtemirov, Q. A., & Oripov, N. M. (2021). Improvement of ring spinning machine stretching equipment. Innovative Technologica: Methodical Research Journal, 2(10), 61-66.

Odilzhanovich, T. K., Odilzhanovich, I. A., & Makhmudovna, N. M. (2021). Analysis of FLUFF in the Process of Lintering of Seeds. Central Asian journal of theoretical & applied sciences, 2(11), 26-28.

Abdulhayevich, T. Q. (2021). Analysis of runners and spinners used in spinning machines. Innovative Technologica: Methodical Research Journal, 2(10), 34-37.

Nabiyev, Q. Q., Yaqubov, N. J., & Toshtemirov, K. A. (2020). Innovative technology in the production of clothing from natural fibers. ACADEMICIA: An International Multidisciplinary Research Journal, 10(11), 1186-1191.

Бекмирзаев, Ш., Саидмахамадов, Н., & Убайдуллаев, М. (2016). Получения Литье В Песчано-Глинистые Методом. Теория и практика современной науки, (6-1), 112-115.

Sharipjanovich, S. O., Umarali og, T. D., & Qizi, B. M. N. (2021). Current State And Analysis Of Equipment For Cleaning And Selection Of Seeds. International Journal of Progressive Sciences and Technologies, 29(2), 337-342.

Ergashev, Y., Xusanova, S., & Axmadjonov, D. (2022). Analysis of the fiber quality of cotton varieties grown by region. Gospodarka i Innowacje., 21, 242-244.

Каримов, Н. М., Абдусаттаров, Б. К., Махмудова, Г., & Саримсаков, О. Ш. (2021). Пневматическая транспортировка хлопка-сырца на хлопкозаводах. In Инновационные Подходы В Современной Науке (pp. 61-70).

Сидиков, А. Х., Махмудова, Г., Каримов, А. И., & Саримсаков, О. Ш. (2021). Изучение движения частиц хлопка и тяжёлых примесей в рабочей камере пневматического очистителя. Universum: технические науки, (2-2 (83)).

Sharifjanovich, S. O. (2021, November). The Velocity Distribution over the Cross Section Pipes of Pneumatic Transport Installations Cotton. In International Conference On Multidisciplinary Research And Innovative Technologies (Vol. 2, pp. 29-34).

Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research (AJMR), 10(2), 11-18.

Mo’minovich, U. M. (2021). The Importance Of Planting And Processing Of Medium-Field Cotton Varieties Between Cotton Rows In Fergana Region. The American Journal of Agriculture and Biomedical Engineering, 3(09), 26-29.

Article Statistics

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Copyright License

Download Citations

How to Cite

Toshtemirov Q.A., & Sultonov.S.T. (2022). IMPROVING THE TRANSMISSION UNITS OF SPINNING SHOP MACHINES. European International Journal of Multidisciplinary Research and Management Studies, 2(05), 40–43. https://doi.org/10.55640/eijmrms-02-05-10