Articles
| Open Access |
DOI:
https://doi.org/10.55640/eijmrms-05-03-10
Engine Cooling System Maintenance
Avliyokulov J.S. , Tashkent State Transport University, Uzbekistan Magdiyev Sh.P. , Tashkent State Transport University, Uzbekistan Tadjiyev R.D. , Tashkent State Transport University, Uzbekistan Ashuraliyev E.Sh. , Tashkent State Transport University, UzbekistanAbstract
The efficiency and longevity of modern automobile engines depend significantly on their thermal conditions, especially in desert-sandy areas where overheating is a frequent issue. The cooling system plays a crucial role in maintaining optimal thermal conditions, and its reliability is influenced by factors such as water pump efficiency, radiator cleanliness, and coolant quality. The accumulation of scale within the cooling system can severely impact heat dissipation, leading to engine wear and possible failure. Various chemical and mechanical methods are available for descaling and flushing the cooling system, thereby improving engine performance and preventing overheating. Additionally, the use of softened water and anti-corrosive additives can enhance the durability of the cooling system. This paper discusses the maintenance procedures, descaling techniques, and best practices for ensuring efficient engine cooling.
Keywords
Engine cooling system, overheating, scale formation
References
Автомобильный транспорта Узбекистана 2004 - 2005 г. «Синяя книга» Москва.
«Транспорт Ташкента» Д.А. Шарахмедов, С.Г. Гулямов. Ташкент 2006г.
Рискулов, А. А., Авлиёкулов, Ж. С., & Рахматов, М. И. (2021). Реализация феномена наносостояния промышленных термопластов. Вестник науки и образования, (12-1 (115)), 38-40.
Авлиёкулов, Ж. С., Нарзиев, С. О., & Магдиев, Ш. П. (2021). Исследование периодичности замены моторного масла в условиях эксплуатации. Вестник науки и образования, (9-3 (112)), 16-19.
Магдиев, Ш. П., Авлиекулов, Ж. С., & Нарзиев, С. О. Анализ Энергосберегающих свойств моторных масел в условиях эксплуатации. ompozitsion, 176.
Nurmetov K., Riskulov, A., & Avliyokulov, J. (2021). Composite tribotechnical materials for autotractors assemblies. In E3S Web of Conferences (Vol. 264). EDP Sciences.
Riskulov, A., Sidikova, T., Khakimov, R., & Avliyokulov, J. (2023). The effect comparative evaluation of energy saving additives on the bitumen properties. E3S Web of Conferences, 401. https://doi.org/10.1051/e3sconf/202340103069
Tajibaev, A., Ibragimov, B., Narziev, S., & Alimov, M. (2023). The Economic Aspect of the Reliability of Vehicles. AIP Conference Proceedings, 2612. https://doi.org/10.1063/5.0115527
Valiev, J., Khakimov, R., Azizov, A., Tursunov, I., Ashurov, O., & Otakuziev, D. (2024). Thermal analysis of the BD contact surface by powered the TS using a thermoelectric generators (TEG). AIP Conference Proceedings, 3045(1). https://doi.org/10.1063/5.0197887
Article Statistics
Downloads
Copyright License
Copyright (c) 2025 Avliyokulov J.S., Magdiyev Sh.P., Tadjiyev R.D., Ashuraliyev E.Sh.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Individual articles are published Open Access under the Creative Commons Licence: CC-BY 4.0.